Resin rings are formed when a liquid resin is poured onto a metal surface and hardens. The ring can be created by dipping the metal in the resin, spreading the resin with a spatula, or using a spray gun. Resin rings usually have an orange or yellow hue because of the dye used in the resin.

You may navigate here http://www.magentaflowers.co.uk/ for a resin ring that will perfectly match your style, be sure to check out our online store.

Image Source: Google

Here are some tips for cleaning and repairing resin rings:

1. Use acetone or lacquer thinner to soften the glue holding the ring together. Be careful not to damage the ring.

2. Scrub gently with a stiff brush or a piece of sandpaper until the ring comes loose. If necessary, use a mixture of soap and water to loosen the adhesive.

3. Remove any remaining debris with a vacuum cleaner and clean the area with acetone or lacquer thinner again. If necessary, apply a coat of epoxy to secure the ring into place.

4. If the ring has been damaged, use a small piece of metal to create a hole in one side of the ring. This will help you pour in glue and fix the ring back together.

5. Pour some epoxy into the hole you created in step 2 and spread it around the outside of the ring. Make sure to cover all of the edges of the hole. Let the epoxy set for at least 30 minutes before using the ring again.

6. If you are only repairing part of a ring, use hot glue to hold the repaired section in place until epoxy sets.